Cosmic Microwave Background Polarization Experiments Research Articles

Identifying frequency de-correlated dust residuals in B-mode maps by exploiting the spectral capability of bolometric interferometry

Astrophysical polarized foregrounds represent the most critical challenge in cosmic microwave background (CMB) $B$-mode experiments, requiring multifrequency observations to constrain astrophysical foregrounds and isolate the CMB signal. However, recent observations indicate that foreground emission may be more complex than anticipated. Not properly accounting for these complexities during component separation can lead to a bias in the recovered tensor-to-scalar ratio. In this paper we investigate how the increased spectral resolution provided by band-splitting in bolometric interferometry (BI) through a technique called spectral imaging can help control the foreground contamination in the case of an unaccounted-for Galactic dust frequency de-correlation along the line of sight (LOS). We focused on the next-generation ground-based CMB experiment CMB-S4 and compared its anticipated sensitivity, frequency, and sky coverage with a hypothetical version of the same experiment based on BI (CMB-S4/BI). We performed a Monte Carlo analysis based on parametric component separation methods (FGBuster and Commander) and computed the likelihood of the recovered tensor-to-scalar ratio, $r$. The main result is that spectral imaging allows us to detect systematic uncertainties on $r$ from frequency de-correlation when this effect is not accounted for in the component separation. Conversely, an imager such as CMB-S4 would detect a biased value of $r$ and would be unable to spot the presence of a systematic effect. We find a similar result in the reconstruction of the dust spectral index, and we show that with BI we can more precisely measure the dust spectral index when frequency de-correlation is present and not accounted for in the component separation. The in-band frequency resolution provided by BI allows us to identify dust LOS frequency de-correlation residuals where an imager with a similar level of performance would fail. This creates the possibility of exploiting this potential in the context of future CMB polarization experiments that will be challenged by complex foregrounds in their quest for $B$-mode detection.

Testing multi-field inflation with LiteBIRD

We investigate expected constraints on the primordial tensor power spectrum from the future cosmic microwave background polarization experiment LiteBIRD as a test of multi-field inflation, where we specifically consider spectator models as representative examples. We argue that the measurements of the tensor-to-scalar ratio and the tensor spectral index, in combination with the constraints on the scalar spectral index from the Planck observation, are useful in testing multi-field inflation models. We also discuss implications for multi-field inflationary model building.

The Simons Observatory: Cryogenic half wave plate rotation mechanism for the small aperture telescopes.

We present the requirements, design, and evaluation of the cryogenic continuously rotating half-wave plate (CHWP) for the Simons Observatory (SO). SO is a cosmic microwave background polarization experiment at Parque Astronómico de Atacama in northern Chile that covers a wide range of angular scales using both small (⌀0.42m) and large (⌀6m) aperture telescopes. In particular, the small aperture telescopes (SATs) focus on large angular scales for primordial B-mode polarization. To this end, the SATs employ a CHWP to modulate the polarization of the incident light at 8Hz, suppressing atmospheric 1/f noise and mitigating systematic uncertainties that would otherwise arise due to the differential response of detectors sensitive to orthogonal polarizations. The CHWP consists of a 505mm diameter achromatic sapphire HWP and a cryogenic rotation mechanism, both of which are cooled down to ∼50K to reduce detector thermal loading. Under normal operation, the HWP is suspended by a superconducting magnetic bearing and rotates with a constant 2Hz frequency, controlled by an electromagnetic synchronous motor. We find that the number of superconductors and the number of magnets that make up the superconducting magnetic bearing are important design parameters, especially for the rotation mechanism's vibration performance. The rotation angle is detected through an angular encoder with a noise level of 0.07 μrad s. During a cooldown process, the rotor is held in place by a grip-and-release mechanism that serves as both an alignment device and a thermal path. In this paper, we provide an overview of the SO SAT CHWP: its requirements, hardware design, and laboratory performance.

Photonic Integrated Circuits for Microwave Astronomy

One of the main objectives of cosmology is the measurement of the Cosmic Microwave Background (CMB) polarization and, in particular, the so-called B-modes, which could demonstrate the existence of the primordial gravitational waves generated at the early stages of the Universe. For this reason, a new integrated version of the heterodyne polarimeter photonic part shown on a previously proposed scheme that can be used in both direct imaging and interferometric instruments is presented. We have tested its properties using specific commercial software, obtaining promising results. Working as a direct imaging instrument, it is shown that the proposed polarimeter can provide sufficiently low polarization angle and polarization efficiency systematic errors, which are considered acceptable for current ground-based CMB polarization experiments dedicated to the characterization of the foreground signals affecting the lowest part of the frequency spectrum.

Improved cosmic microwave background (de-)lensing using general spherical harmonic transforms

Deep cosmic microwave background polarization experiments allow a very precise internal reconstruction of the gravitational lensing signal in principle. For this aim, likelihood-based or Bayesian methods are typically necessary, where very large numbers of lensing and delensing remappings on the sphere are sometimes required before satisfactory convergence. We discuss here an optimized piece of numerical code in some detail that is able to efficiently perform both the lensing operation and its adjoint (closely related to delensing) to arbitrary accuracy, using nonuniform fast Fourier transform technology. Where applicable, we find that the code outperforms current widespread software by a very wide margin. It is able to produce high-resolution maps that are accurate enough for next-generation cosmic microwave background experiments on the timescale of seconds on a modern laptop. The adjoint operation performs similarly well and removes the need for the computation of inverse deflection fields. This publicly available code enables de facto efficient spherical harmonic transforms on completely arbitrary grids, and it might be applied in other areas as well.

Multiclustering needlet ILC for CMB B-mode component separation

ABSTRACT The Cosmic Microwave Background (CMB) primordial B-mode signal is predicted to be much lower than the polarized Galactic emission (foregrounds) in any region of the sky pointing to the need for sophisticated component separation methods. Among them, the blind Needlet Internal Linear Combination (NILC) has great relevance given our current poor knowledge of the B-mode foregrounds. However, the expected level of spatial variability of the foreground spectral properties complicates the NILC subtraction of the Galactic contamination. We therefore propose a novel extension of the NILC approach, the Multiclustering NILC (MC-NILC), which performs NILC variance minimization on separate regions of the sky (clusters) properly chosen to have similar spectral properties of the B-mode Galactic emission within them. Clusters are identified thresholding either the ratio of simulated foregrounds-only B modes (ideal case) or the one of cleaned templates of Galactic emission obtained from realistic simulations. In this work we present an application of MC-NILC to the future LiteBIRD satellite, which targets the observation of both reionization and recombination peaks of the primordial B-mode angular power spectrum with a total error on the tensor-to-scalar ratio δr < 0.001. We show that MC-NILC provides a CMB solution with residual foreground and noise contamination that is significantly lower than the NILC one and the primordial signal targeted by LiteBIRD at all angular scales for the ideal case and at the reionization peak for a realistic ratio. Thus, MC-NILC will represent a powerful method to mitigate B-mode foregrounds for future CMB polarization experiments.

Mitigating Bias in CMB B-modes from Foreground Cleaning Using a Moment Expansion

One of the primary challenges facing upcoming cosmic microwave background (CMB) polarization experiments aiming to measure the inflationary B-mode signal is the removal of polarized foregrounds. The thermal dust foreground is often modeled as a single modified blackbody; however, overly simplistic foreground models can bias measurements of the tensor-to-scalar ratio r. As CMB polarization experiments become increasingly sensitive, thermal dust emission models must account for greater complexity in the dust foreground while making minimal assumptions about the underlying distribution of dust properties within a beam. We use Planck dust temperature data to estimate the typical variation in dust properties along the line of sight and examine the impact of these variations on the bias in r if a single modified blackbody model is assumed. We then assess the ability of the moment method to capture the effects of spatial averaging and to reduce bias in the tensor-to-scalar ratio for different possible toy models of dust emission. We find that the expected bias due to temperature variations along the line of sight is significant compared to the target sensitivities of future CMB experiments, and that the use of the moment method could reduce bias as well as shed light into the distribution of dust physical parameters.

Evaluation of the effect of gravity on the rotational loss of superconducting magnetic bearings for space applications

We study the relationship between the levitation gap change and losses in a superconducting magnetic bearing (SMB) system. We develop a polarization modulator bearing for a cosmic microwave background (CMB) polarization experiment. The heat generated by the polarization modulator needs to be kept very low. Therefore, it is essential to model the effect of the levitation gap change of a rotor due to gravity on the rotational loss. We have constructed a prototype small experimental platform of an axial-flux SMB with an array of high-temperature superconductors, YBCO, and a permanent magnet ring. In this system, the weight of the rotor can be set. We measured the effect of the change in the levitation gap of the rotor due to gravity on the loss. When the levitation force was 5.5 N and 16.0 N, the losses generated in the rotor were 9.1 × 10−3 W and 1.6 × 10−2 W, respectively. It was confirmed that the loss increases with the increase in the levitation force of the SMB.

Probing prerecombination physics by the cross-correlation of stochastic gravitational waves and CMB anisotropies

We study the effects of pre-recombination physics on the Stochastic Gravitational Wave Background (SGWB) anisotropies induced by the propagation of gravitons through the large-scale density perturbations and their cross-correlation with Cosmic Microwave Background (CMB) temperature and E-mode polarization ones. As examples of Early Universe extensions to the $\Lambda$CDM model, we consider popular models featuring extra relativistic degrees of freedom, a massless non-minimally coupled scalar field, and an Early Dark Energy component. Assuming the detection of a SGWB, we perform a Fisher analysis to assess in a quantitative way the capability of future gravitational wave interferometers (GWIs) in conjunction with a future large-scale CMB polarization experiment to constrain such variations. Our results show that the cross-correlation of CMB and SGWB anisotropies will help tighten the constraints obtained with CMB alone, with an improvement that significantly depends on the specific model as well as the maximum angular resolution $\ell_{\rm max}^{\rm GW}$ of the GWIs, their designed sensitivity, and the amplitude $A_*$ of the monopole of the SGWB.

The Atacama Cosmology Telescope: Microwave Intensity and Polarization Maps of the Galactic Center

Abstract We present arcminute-resolution intensity and polarization maps of the Galactic center made with the Atacama Cosmology Telescope. The maps cover a 32 deg2 field at 98, 150, and 224 GHz with ∣l∣ ≤ 4°, ∣b∣ ≤ 2°. We combine these data with Planck observations at similar frequencies to create coadded maps with increased sensitivity at large angular scales. With the coadded maps, we are able to resolve many known features of the Central Molecular Zone (CMZ) in both total intensity and polarization. We map the orientation of the plane-of-sky component of the Galactic magnetic field inferred from the polarization angle in the CMZ, finding significant changes in morphology in the three frequency bands as the underlying dominant emission mechanism changes from synchrotron to dust emission. Selected Galactic center sources, including Sgr A*, the Brick molecular cloud (G0.253+0.016), the Mouse pulsar wind nebula (G359.23-0.82), and the Tornado supernova remnant candidate (G357.7-0.1), are examined in detail. These data illustrate the potential for leveraging ground-based cosmic microwave background polarization experiments for Galactic science.

The picasso map-making code: application to a simulation of the QUIJOTE northern sky survey

ABSTRACT Map-making is an important step for the data analysis of cosmic microwave background (CMB) experiments. It consists of converting the data, which are typically a long, complex, and noisy collection of measurements, into a map, which is an image of the observed sky. We present in this paper a new map-making code named picasso (Polarization and Intensity CArtographer for Scanned Sky Observations), which was implemented to construct intensity and polarization maps from the Multi Frequency Instrument (MFI) of the QUIJOTE (Q-U-I Joint TEnerife) CMB polarization experiment. picasso is based on the destriping algorithm, and is suited to address specific issues of ground-based microwave observations, with a technique that allows the fit of a template function in the time domain, during the map-making step. This paper describes the picasso code, validating it with simulations and assessing its performance. For this purpose, we produced realistic simulations of the QUIJOTE-MFI survey of the northern sky (approximately ∼20 000 deg2), and analysed the reconstructed maps with picasso, using real and harmonic space statistics. We show that, for this sky area, picasso is able to reconstruct, with high fidelity, the injected signal, recovering all the scales with ℓ > 10 in TT, EE, and BB. The signal error is better than 0.001 per cent at 20 < ℓ < 200. Finally, we validated some of the methods that will be applied to the real wide-survey data, like the detection of the CMB anisotropies via cross-correlation analyses. Despite that the implementation of picasso is specific for QUIJOTE-MFI data, it could be adapted to other experiments.

Modelling the Energy Losses of a Superconducting Magnetic Bearing due to the Change of the Levitation Height Under Gravity

This paper describes the losses of the rotor of the prototype superconducting magnetic bearing (SMB) that is employed for a polarization modulator of a Cosmic Microwave Background polarization experiment. The stator is composed of 20 segmented YBCO bulks, and these multiple superconductors produce the inhomogeneous magnetic field particularly due to the gravitational displacement of the rotor magnet position from the initial field cooling. This inhomogeneity causes the power dissipation to the spinning rotor. We estimated the power dissipation originating from this inhomogeneous magnetic field by using a numerical approach. The superconductors were modelled as electrically conducting components in the numerical simulation to avoid the complexity in modelling superconductivity. The results show about 4 mW dissipated at the rotor.

Integrated Electrical Properties of the Frequency Multiplexed Cryogenic Readout System for Polarbear/Simons Array

Polarbear/Simons Array is a cosmic microwave background (CMB) polarization experiment, with science goals including a deep search for CMB B-mode polarization created by inflationary gravitational waves, and characterization of the CMB B-mode signal from gravitational lensing. When completed, Simons Array will have over 20,000 superconducting transition-edge sensor bolometers, cooled to 300 mK with closed-cycle cryogenics. This significant increase in detectors and sensitivity is enabled by advancements in frequency multiplexed readout. The detectors are read out with DfMux digital frequency-domain multiplexing, with 40 channels read out by each SQUID array, with frequency channels between 1 and 5 MHz defined by an inductor and capacitor in series with each detector. After the system was completed and characterized for Polarbear-2a, modifications were made that further improved performance for Polarbear-2b. We present the characterization of the integrated cryogenic readout system for Polarbear-2a and Polarbear-2b, and comparison of properties including stray impedance and frequency scatter.

Probing dark matter with future CMB measurements

Dark Matter (DM) annihilation and decay during the Dark Ages can affect the cosmic ionization history and leave imprints in the Cosmic Microwave Background (CMB) anisotropy spectra. CMB polarization anisotropy can be sensitive to such energy injection at higher redshifts and help reducing degeneracy with primordial spectral parameters in $\Lambda$CDM and astrophysical ionization processes during reionization. In light of a number of upcoming CMB polarization experiments, such as AdvACTPol, AliCPT, CLASS, Simons Observatory, Simons Array, SPT-3G, we estimate their prospective sensitivity in probing dark matter annihilation and decay signals. We find that future missions have 95\% C.L. projected limits on DM decay and annihilation rates to orders of $\Gamma_\chi (\tau_{\chi}^{-1}) \sim 10^{-27}{\rm{s}}^{-1}$ and $\left<\sigma v \right>/m_{\chi} \sim 10^{-29}{\rm{cm^3s^{-1}GeV^{-1}}}$ respectively, significantly improving the sensitivity to DM from current experimental bounds.

GroundBIRD: A CMB Polarization Experiment with MKID Arrays

GroundBIRD is a ground-based experiment for the precise observation of the polarization of the cosmic microwave background (CMB). To achieve high sensitivity at large angular scale, we adopt three features in this experiment: fast rotation scanning, microwave kinetic inductance detector (MKID) and cold optics. The rotation scanning strategy has the advantage to suppress $1/f$ noise. It also provides a large sky coverage of 40\%, which corresponds to the large angular scales of $l \sim 6$. This allows us to constrain the tensor-to-scalar ratio by using low $l$ B-mode spectrum. The focal plane consists of 7 MKID arrays for two target frequencies, 145 GHz and 220 GHz band. There are 161 pixels in total, of which 138 are for 144 GHz and 23 are for 220 GHz. This array is currently under development and the prototype will soon be evaluated in telescope. The GroundBIRD telescope will observe the CMB at the Teide observatory. The telescope was moved from Japan to Tenerife and is now under test. We present the status and plan of the GroundBIRD experiment.

Half-meter Scale Superconducting Magnetic Bearing for Cosmic Microwave Background Polarization Experiments

We report the development of a large-diameter superconducting magnetic bearing (SMB) used in a continuously rotating cryogenic half-wave plate (HWP) polarization modulator for cosmic microwave background (CMB) polarization experiments. A precise measurement of the CMB polarization will place tighter constrains on cosmic inflation, describing the rapid expansion of the early universe. The polarization modulator is a critical instrument for suppressing 1/f contamination, which is mainly caused by atmospheric noise, and for mitigating systematic uncertainties that arise when differencing orthogonal polarization detectors. To ensure a sufficient field of view and to reduce thermal emission, the polarization modulator must have a clear-aperture diameter of > 500 mm and must operate at cryogenic temperatures. We constructed a superconducting magnetic bearing (SMB) with an inner diameter of 550 mm, which is the largest used in any CMB polarization experiment to date. We tested the friction and stiffness of the bearing at liquid nitrogen temperatures. The measured total loss is 0.4 W and the spring constant is >105 N/m, which satisfies typical experimental requirements. Furthermore, we performed a performance test by changing the number of disk-shaped YBCO tiles, and then confirmed that the SMB performance was proportional to the YBCO volume.

Study of warm inflationary models and their parameter estimation from CMB

Warm inflation is a natural and well-motivated description of cosmic inflation which accounts for the inflaton dissipation and radiation production during the inflationary phase, neglected in the standard cold description. It results in crucial differences in the imprints on the Cosmic Microwave Background (CMB) radiation from the standard cold description. In this study, we consider warm inflation models with [Formula: see text] and [Formula: see text] potentials and estimate their model parameters consistent with CMB using the CosmoMC numerical code. These models are characterized by the inflaton self coupling, [Formula: see text], and the dissipation parameter, [Formula: see text], due to the inflaton’s dissipation into the other fields. Therefore, information about these physical parameters is essential from the perspective of the model building. In our analysis, we also calculate the spectral index, [Formula: see text], and the tensor-to-scalar ratio, [Formula: see text], for the mean values of the parameters and show that for the weak dissipative regime, [Formula: see text], is within the sensitivity of the next generation CMB polarization experiments, which is an important observational test for these models.

Development of Space-Optimized TES Bolometer Arrays for LiteBIRD

LiteBIRD is a cosmic microwave background polarization experiment with the goal of measuring the tensor-to-scalar ratio with a total uncertainty of $$\delta r <0.001$$. It will survey the full sky from space for 3 years in 15 frequency bands spanning 34–448 GHz. We are developing detector arrays for the six lowest frequency bands covering 34–99 GHz. The arrays are populated with lenslet-coupled sinuous antennas, triplexer bandpass filters, and transition-edge sensor (TES) bolometers. We have measured the electrical and thermal properties of several TES designs to determine space-optimized parameters. The design balances requirements for low saturation power of the space environment while maintaining a fast time response for use with a continuously rotating half-wave plate. We have achieved detector saturation powers below 1 pW, with time constants faster than 1 ms, at a 100 mK bath temperature measured using both time- and frequency-division multiplexed SQUID readout systems. Using this information, we have fabricated multi-chroic pixels with antenna-coupled space-optimized bolometers.

Effect of Stray Impedance in Frequency-Division Multiplexed Readout of TES Sensors in POLARBEAR-2b

POLARBEAR-2b (PB-2b) is the second of three cryogenic receivers of the Simons Array cosmic microwave background polarization experiment. PB-2b contains over 7500 transition-edge sensor (TES) bolometers cooled to 250 mK and read out using digital frequency-division multiplexing (DfMux). Stray impedance in the DfMux circuit obscures TES characterization and affects TES dynamic behavior. In order to accurately characterize TESs, it is necessary to account for stray impedance in the bias circuit. We define a stray impedance model, and we describe the technique used to measure model parameters in situ and to remove their effects on TES characterization. We use the same model to predict TES dynamic behavior and show good agreement between data and the model.

Updated Design of the CMB Polarization Experiment Satellite LiteBIRD

Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite cosmic microwave background (CMB) polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA’s H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the CMB by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34 and 448 GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy’s foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5 K for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun–Earth Lagrangian point, L2, are planned for 3 years. An international collaboration between Japan, the USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science, JAXA, selected LiteBIRD as the strategic large mission No. 2.